Home → PressONE Customer KnowledgeBase → 9. Phone Basics → Setting the TFTP Address in your Cisco IP Phone 7960/7940

15.1. Setting the TFTP Address in your Cisco IP Phone 7960/7940

  1. Press the Settings button on your phone.
  2. Using the blue scroll button, press the down arrow until Option #3 'Network Configuration' and press the 'Select' Softkey, or press the number 3 on your dial pad.
  3. Press * * # on your dial pad. This will unlock the phone so you can edit the settings of the phone. To verify that you have successfully unlocked the phone, look at the top right corner of the screen and see a pad lock that is "unlocked".
  4. Scroll down to Option #32, "Alternate TFTP" and verify that it says YES. If it does not say YES, press the YES Softkey.
  5. Scroll up to Option #8, "TFTP Server 1" or press 8 on your dial pad.
  6. Press the EDIT softkey and enter in 207*34*32*100
  7. Press the Validate softkey.
  8. Press the Save softkey.
  9. Press the Cancel softkey.
  10. Press the Save softkey
  11. At the bottom of the screen you should see "All changes Saved"

This page was: Helpful | Not Helpful
← 15. 9. Phone Basics 15.2. Setting TFTP address in your Cisco IP Phone 7961/7941 →